Tin Roof Solar Mounting System: Installation Steps, Components & Advantages
A tin roof solar mounting system is the fastest way to turn corrugated, trapezoidal or standing seam metal roofing into a profitable power plant. Also called a metal roof solar mounting system or metal roof PV racking, it fixes photovoltaic modules onto the roof structure without weakening the sheets, and on standing seam roofs without drilling a single hole. Here is what it includes and why it wins on industrial rooftops.
What Is a Tin Roof Solar Mounting System?
It is the full set of aluminum and stainless steel hardware that carries a solar array above the roof surface: mounting rails, L-feet brackets, mini rails, standing seam clamps, mid and end clamps, EPDM sealing washers, bolts and grounding clips. The system transfers wind and snow loads from the modules into the roof purlins while keeping the roof waterproof.
Main Components
Aluminum mounting rails in 6005-T5 alloy, sized to the design wind and snow load.
L-feet brackets for corrugated and trapezoidal tin roofs.
Mini rails that clamp onto the sheet ribs for low-profile fixing.
Non-penetrating standing seam clamps for seam metal roofs.
Mid and end clamps with anti-theft bolts, EPDM gaskets and grounding clips.
How to Install Solar Panels on a Tin Roof
Survey the roof: sheet profile, thickness, purlin spacing, design wind and snow loads.
Design the layout: row spacing, module orientation, walkways and edge zones.
Mark fixing points on the rib crests, always above a purlin.
Pre-drill, seal with EPDM or butyl, then fix the brackets.
Bolt the rails, check level, then clamp the modules at the specified torque.
Bond, ground and commission the array.
Advantages of This Mounting System
25-year design life with anodized aluminum rails and stainless steel fasteners.
Non-penetrating options that protect the roof waterproofing and warranty.
Engineered wind and snow load capacity, verified by structural calculation.
Fast installation: modular, pre-assembled parts cut rooftop labour sharply.
Corrosion resistance for coastal, chemical and heavy-industry sites.
Universal fit for 182 mm and 210 mm framed modules.
One complete kit: rails, brackets, clamps, bolts, grounding and sealing.
Free engineering support with layout drawings and load calculations.
Frequently Asked Questions
Can solar panels go on a tin roof without drilling? Yes. Standing seam roofs accept non-penetrating clamps, and many trapezoidal profiles take clamp-on mini rails.
Will it damage the roof warranty? Not when the system is specified correctly and sealed with EPDM or butyl.
What does a tin roof solar mounting system cost? Price depends on roof profile, rail specification and local wind and snow loads, so kits are quoted per kilowatt or per module.
- Industry News
- Company News
- blog
